A well-balanced centre of gravity and the sleek design make for tilt-proof routing. The cordless drive gives you greater agility and flexibility. Our cordless edge router delivers precise and clean routing results thanks to a depth adjustment that's accurate to 1/10 mm and a stable connection between the router and the drive. So, edge routing is super easy and straightforward, with no need for reworking.
Main applications
Technical data
Noise and vibration values
Do you need a spare part for your tool? We can help you!
To find the right spare part, you need the exact machine type and part number. You can find this information on the rating plate directly on your machine. You can find all further information on the ordering process on the linked page.
Important: To ensure that your machine works safely and reliably, repairs should only be carried out in an authorised workshop for quality and safety reasons.
Get ready for smooth workflows and easier handling of the machine without a messy tangle of cables. You can dive straight in with just a few settings.
Lightweight, slim design for comfy working. Perfectly matched cutters for the base opening stop you from tipping over while routing into the material. This lets you route safely and quickly without having to redo anything.
You can fine-tune the height precisely in 0.1 mm increments. Having the cutter mounted directly on the spindle boosts run-out accuracy and gives you a tidy finish. The flush ball bearing attachment on the cutter keeps the height low and lets you route in rebates or from the stack of panels.
The flush ball bearing mount on the cutter keeps the height down to just 12 mm and makes it easy to route in rebates or from a stack of panels.
The routing depth can be adjusted accurately to 1/10 mm. The lock prevents the router table from moving during operation and is easy to operate.
The router can be changed quickly and easily thanks to the spindle stop.
The clear dust extraction attachment makes sure that routing shavings are sucked up properly. The spring-loaded ball bearing brake stops scorch marks from appearing on the surface.
Efficiency, power, low noise and minimal vibrations: it’s all possible thanks to the brushless EC-TEC motor with built-in motor management.
The sleek design and tilted position of the battery pack give you a perfect centre of gravity whether you're using it horizontally or vertically.
With the OFK 500 series, the cutter is mounted straight onto the spindle. That ensures top-notch run-out accuracy and the best quality work.
The battery pack built in to the router, makes for easy edge routing without all the cable mess.
The hard-wearing base runner stops nasty scratches or dents on the workpiece and gives you smooth sliding on any surface.
Smaller hole diameter in the base plate and matching cutters for perfect milling results without tipping.
Cheers to the spring plate on the ball bearing brake, you’ve got more space to move when working without dust extraction.
Thanks to the MMC electronics, you can quickly tweak the speed to match the material you're working with, and it stays constant even under load. Plus, the motor's temperature monitoring helps ensure it lasts a long time.
When you use Bluetooth® battery packs, you can easily combine cordless edge routers with the extractor's remote switch – machine on, extractor on.
By connecting to the Festool app, you can check out various machine data, like the last location. You can also quickly find the right accessories and handy tips. Plus, you can carry out software updates or create a repair order if you need a service.
There is more to discover
You may not have all functions available. We recommend that you download a new browser version.
