MB 40-Set

Enables you to fit Festool cordless drills and cordless percussion drills quickly, easily and entirely without tools.

For depth-limited holes up to 50 mm, such as series of holes or cupboard hinges, the exact plunge depth into the material can be set in mm or inches using the scale.

For holes in the 32 mm system with a 3 mm hole series pin and a 5 mm hole series pin. The pin stays in the same spot throughout the hole series project. No need to switch the pin.

For fast and precise drilling with repeat accuracy, parallel to an edge.

Enables precise drilling in panel edges.

For fast drilling in a line. The adapter can be attached to all Festool guide rails without tools.

Enable easy guidance when drilling. For special applications, you can convert the drilling attachment and remove the spring.

Thanks to the holes in the base plate, you can fit the MB 40 on a workpiece or on individually built fixtures.

Help when drilling series of holes, cupboard hinges and alignment on the scribe mark, to achieve drilled holes with pinpoint accuracy.

For a clear view of the drilling point and a clean working environment, a mobile dust extractor from dust class M can be connected to the extractor connector.