Staged demonstration. Do not replicate this! Please observe the original instructions and the general safety advice! Festool and TTS Tooltechnic Systems are not liable for any injuries caused by improper use of the product illustrated.

Your fingers – invaluable!

The new TKS table saw with SawStop AIM technology.

Start page

Your most valuable tools – your fingers.

The new SawStop AIM technology reduces the risk of extremely serious cutting injuries.

Drawing a line with a pencil. Unloading tools from a vehicle. Pulling a screw out of the floor. How many fingers could you afford to lose? The risk of serious cutting injuries is reduced. While you concentrate on your work, we protect your most valuable tools – your fingers.

Go to product catalogue

After all, you can't replace your fingers. An outstanding invention!

This is how users reacted when they experienced the SawStop AIM technology at a live demonstration.
"Ich kann mir keine bessere Tischkreissäge vorstellen, die ist der Oberhammer!"

Florian Handab, München

"Ich kann mir keine bessere Tischkreissäge vorstellen, die ist der Oberhammer!"

Florian Handab, München

"Ich kann mir keine bessere Tischkreissäge vorstellen, die ist der Oberhammer!"

Florian Handab, München

"Ich kann mir keine bessere Tischkreissäge vorstellen, die ist der Oberhammer!"

Florian Handab, München

"Ich kann mir keine bessere Tischkreissäge vorstellen, die ist der Oberhammer!"

Florian Handab, München

The risk of serious cutting injuries is reduced.


here's how it works!

  • Integrated in a table saw, the intelligent SawStop AIM technology reduces the risk of extremely serious cutting injuries.

  • The heart of the technology is a cartridge that works together with a spring to push an aluminium block into the saw blade if it comes into contact with the user's skin during operation.

  • The saw blade stops in just five milliseconds, disappearing into the machine bench and out of the hazard area. This prevents serious cutting injuries.

  • The intelligent electronics in the SawStop AIM control system continuously monitor the operating status of the entire system. A clear visual display means that users can quickly see the current operating status of the table saw. When the green LED lights up, the SawStop AIM technology is ready for use.

  • To prevent it from being triggered accidentally, the material to be cut should be checked for conductivity while the saw blade is stopped. When the red LED is lit, the mechanism is active and it can be triggered. The SawStop AIM technology can be switched off if the user wishes to do so. If this is necessary, the technology must be deactivated before each new cut.

  • If the mechanism has been triggered, the saw can be made ready to use again in just a few steps. All you need is a new cartridge and a new saw blade. Open the cover, remove the old saw blade and cartridge and replace them with the new set – that's all. The system will then check that they are fitted correctly. As soon as the LED constantly lights up green, work can continue.

We protect your fingers
The heart of the saw
Lightning-fast response
Intelligent electronics
Reliable material checking
Quick saw blade and cartridge change
We protect your fingers
The heart of the saw
Lightning-fast response
Intelligent electronics
Reliable material checking
Quick saw blade and cartridge change
We protect your fingers
The heart of the saw
Lightning-fast response
Intelligent electronics
Reliable material checking
Quick saw blade and cartridge change

It all started in a barn in America –

the origins of SawStop AIM technology.

SawStop AIM technology was originally developed by Dr Steve Gass, who later used it as the foundation on which to establish the SawStop business, one of the leading suppliers of stationary table saws in the USA. In July 2017, this American company was integrated into the TTS Group as a fully owned subsidiary and independent company. SawStop LLC continues to supply the American market with high-quality bench saws…