Whether in the workshop, on the construction site or at home: The Festool App is your companion for smart working and perfect results.
Scan the QR code and install the app.
You can set the LED light according to your needs. The following settings are possible if the QUADRIVE is connected to the Work App:
-
Setting the afterglow time
If the adjusting wheel is in a random torque position, or in the "Drill" position, then the user can set how long the LED light on the QUADRIVE should light after screwing or drilling using the Work App. A time between 2 and 10 seconds can be set.
-
Setting the steady light
If the adjusting wheel at the QUADRIVE is in the "Light on" position, then the user can set how long the LED light remains switched on after screwing or drilling until it automatically goes out using the Work App. A time between 1 and 15 minutes can be set.
-
Setting the brightness
Irrespective of the position of the adjusting wheel, the brightness of the LED light can be infinitely adjusted between 25 and 100% using the Work App.
Note:
Please note that in doing so you make changes to the tool and permanently change the state of the tool. Switching off the tool or removing the Bluetooth® battery pack does not reset the QUADRIVE to the factory settings. For this you must actively reverse the settings in the Work App.
- The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under licence.
