Information on Bluetooth® connection

PLANEX LHS 2 225 Quick Guide - Pairing with Work App

Connecting the PLANEX to the Work App via Bluetooth®

1. Plug the mains power cable of the PLANEX long-reach sander into the electrical socket.
2. Hold down the Bluetooth® key for three seconds.
3. Both LEDs flash blue and the PLANEX is ready to connect within the next 60 seconds. 
4. Follow the instructions provided in the Festool Work App. Once registration is successful, the app function can be used after a few minutes. The status of the registration can be seen at any time under the 'all tools' option.
5. The LEDs light up green without flashing, as soon as the settings previously used in the Festool Work App are active. Press the Bluetooth® key to switch back to the factory settings.
 
Any further questions?

Whether you require advice, support or repair – we are always happy to hear from you.

Use the "SERVICE" menu in the Work App.

  1. The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under licence.