Connecting cordless tool with mobile dust extractor and disconnecting again

  • Connecting: Pressing the connection button on the mobile dust extractor

    In standby mode, briefly press the connection button. The indicator flashes slowly and you can now connect your mobile dust extractor within the next 60 seconds.

    +

  • Connecting: Switching on the cordless tool with Bluetooth® battery pack

    Now switch on the power tool with Bluetooth® battery pack that you want to connect to the mobile dust extractor. The cordless tool and the mobile dust extractor are then connected.

    Note: Only one Bluetooth® battery pack can be connected to the mobile dust extractor at a time. Connecting a new Bluetooth® battery pack disconnects the previous Bluetooth® battery pack.

    +

  • Disconnecting the cordless tool from the mobile dust extractor

    Three options are available to you for disconnecting the coupled cordless tool from the mobile dust extractor:

    1. Switch off the mobile dust extractor

    2. Pull out the mains plug of the mobile dust extractor

    3. Attach the Bluetooth® battery pack to a charger

    +

Connecting remote control with mobile dust extractor and disconnecting again

  • Connecting: Pressing the connection button on the mobile dust extractor

    Hold down the connection button on the mobile dust extractor for approx. three seconds. The indicator flashes quickly and you can now connect your mobile dust extractor within the next 60 seconds.

    +

  • Connecting: Activating the remote control

    Now press the MAN button on the remote control. The remote control is now connected to the mobile dust extractor. Press the MAN button on the remote control to switch the mobile dust extractor on and off.

    +

  • Switching the remote control from one mobile dust extractor to another

    The remote control must be reset first. To do so, hold down the connection button and the MAN button on the remote control for ten seconds. The LED indicator on the remote control briefly flashes purple when resetting is complete. You can now make a new connection to another mobile dust extractor (see step 1 for this). A mobile dust extractor can be connected to as many as five remote controls at the same time.

    Note: A mobile dust extractor can be connected to as many as five remote controls at the same time.

     

    +
Any further questions?

Whether you require advice, support or repair – we are always happy to hear from you.

Use the "SERVICE" menu in the Work App.

  1. The Bluetooth® word mark and the logos are registered trademarks of Bluetooth SIG, Inc.; they are used by TTS Tooltechnic Systems AG & Co. KG, and therefore by Festool, under licence.