Checking the suction power and suction hose

  • Suction power

    Ensure that the suction power is not set too low. Press the + button to set a higher suction power.

    +

  • Suction hose

    The acoustic warning signal could also have been triggered by a kinked or clogged suction hose. Check the suction hose.

    +

Checking the main filter

  • Removing the main filter

    Open the extractor via the T-LOC lock and unlock the dust container. Then completely remove the dust container. The main filter is located on the side of the container.

    +

  • Checking the main filter

    Remove the main filter and vacuum it using a different mobile dust extractor. Also check the main filter for damage and cracks in the filter material or sealing foam.

    +

  • Changing the main filter

    To avoid damaging the suction turbine, replace the main filter if damaged.

    +

Checking the filter bag

  • Checking the filter bag

    Change the filter bag if full. If the filter bag is only partially filled, rock it a little in order to release stuck dust from the inner wall of the filter bag.

    +
Any further questions?
Whether you require advice, support or repair – we are always happy to hear from you. Use the "SERVICE" menu in the Work App.